This blog explains how to clean Cricut mats in two easy ways. As you know, it’s a little annoying when you have an urgent project, and you are unable to stick the material to the Cricut mat. Hence, it’s a big problem for all crafters who want to save time and money. But here, you will learn everything to clean your Cricut mat.

We know that the Cricut machine does so much for us. It helps in preparing projects either for your business or personal use. Hence, it’s very common that the Cricut mats will wear out and lose their stickiness.

Here are two easy methods to clean your Cricut mats easily and effectively so that the materials can restick to the surface of your mats.

How To Clean Cricut Mats?

Here are two methods explained with which you can clean your Cricut mats:

Method 1

This method is a gentle way to clean your Cricut mats by following a few steps. When the Cricut mats aren’t sticking enough or properly holding your material, you can try these methods and again make it work. With time and use, your Cricut mats get packed with dust and debris. Remember to be gentle while cleaning it to make it long last.

In this method, there are further three ways to clean it:

Sticky lint roller

How to clean Cricut mats with a sticky lint roller:

• Apply the sticky lint roller all over the Cricut mat to remove all the dust, fibers, papers, and hairs.
• You can apply it every day between projects or when needed.
• The sticky lint roller helps remove all the left bits of paper instead of removing them with hands or tweezers. The lint roller is stickier than a mat, pulling out all the offending hairs and papers. However, it works on the less sticky mat.
• It’s safe for the pink Cricut fabric grip mats.

Baby wipes

Here are the steps for cleaning Cricut mats:

• In this method, gently wipe down your mat with baby wipes, which are unscented, alcohol-free, and bleach-free. It is also lotion and cornstarch free. These wipes give you the plainest wipes. You aren’t using additional lotions, oils, or solvents that may interfere with the stickiness.
• Let it dry before using.

Soap and warm water

Here are the steps to clean the mat with soap and warm water:

• You can wash the mat with soap and warm water.
• Use dish soap free of lotions that will not make your mat greasy.
• Then, gently scrub with the cloth, soft sponge, soft brush, or magic eraser, and rinse well.
• Let it dry before using.
• Note: Don’t use very hot water as it may damage your Cricut mat and won’t fit in your machine properly.

Method 2

You should try this method if the gentle methods don’t work or restore the mat’s functionality. We use adhesive remover in this method to properly clean your Cricut mat. The cleaning methods in this blog are not for pink Cricut fabric grip mats. This is only for blue, green, and purple ones. As we discussed that we use adhesive remover in this second method, you should know what they are.

So, adhesive removers are heavy solvents used to dissolve the adhesive on your Cricut mat and help remove all the debris. Remember that this method will remove all the adhesive from your Cricut mat. Hence, you need to reapply the adhesive to make your mat work again.

How To Remove Adhesive From Cricut Mats With Adhesive Remover?

Here are the steps:

• Read all the directions carefully to remove the adhesives from your Cricut mats.
• Then, spray a small amount of adhesive remover on your mat.
• Use a scraper to spread it all over your mat. You can also use a plastic piece or an old card.
• Let the solvent settle down and work. Try to let it sit for longer, as it will remove more of the debris. However, the duration to sit may vary from solvent to solvent. Hence, read the directions carefully. A few minutes is recommended to take out the dirty layer of adhesive.
• Then, use a scraper to remove the dirty adhesive layer from your mat. You can also use a cloth or paper towel to wipe it off.
• Now to remove the leftover residue, wash the mat with soap and warm water.
• Let your Cricut mat dry completely.

How To Take Care Of Your Cricut Mats?

This is very important if you always want your Cricut mat to work well. If you have learned how to clean Cricut mats, this section will help you take care of them properly, so they don’t get dirty too frequently.

Therefore, we have a few tips for you:

• Cover your Cricut mats when not using: Use the clear film cover that comes with the cutting mat and replace it timely.
• Don’t be harsh on your mats: Don’t touch the sticky surface of your mat with your hands, as this may interfere with the adhesive over time. Use the proper tools to cut or scrap from the Cricut mats, including spatulas, scrapers, and tweezers.
• Routinely clean your mats: Use a sticky lint roller or baby wipes to clean your Cricut mats timely.
• Replace the mat if it starts losing its stickiness. Don’t put your Cricut machine at risk with some random hacks.

Visit: Cricut.com/setup
www.cricut.com/setup
Cricut setup

Source: https://design-beta2-cricut.com/how-to-clean-cricut-mats/

1. cricut.com/setup
2. cricut cut smart setup
3. cricut download laptop install
4. cricut explore air 2 setup
5. cricut joy setup
6. cricut maker 3 setup
7. Cricut Mats
8. cricut setup explore air 2 setup
9. design space download for windows
10. install cricut app
11. set up new cricut maker
12. www.Cricut.com/Setup