How to Use a Vape Pen for THC and CBD
Using a vape pen is a simple and easy way to vape, even if it’s your first time. Vape pens were the natural progression of the original e-cigarette. Originally, they were used mostly for nicotine vaping, but today vape pens are primarily used with pre-filled THC oil and CBD that you can get from your cannabis plant by planting various seeds that are available at https://marijuanaseedsforsale.com/. Due to their versatility, vape pens can be utilized with a variety of atomizers that allow you to vape various substances. This guide focuses on each type of vape pen and will explain how to use them properly for THC, CBD and nicotine.
What is a vape pen?
A vape pen is a power source that heats up a vape tank or cartridge to produce vapor. They’re rechargeable battery-powered devices that are pocket-sized and cylindrical – hence, the name “pen.” Vape pens first hit the e-cigarette scene around 2010 from a company called Janty, then shortly after were popularized by Joyetech.
This device revolutionized the vaporizer market by offering larger battery capacity and longer running times, as well as providing the user with the ability to swap atomizers or cartridges. Prior to vape pens, e-cigarettes were small self-contained units in the shape and size of a cigarette.
How to use a vape pen for THC
Weed oil and distillate carts
Disclaimer: THC oil cartridges are suitable for vaping and are not the same thing as tinctures, which are for oral use only.
Today, the most common use for vape pens is for re-fillable cannabis oil cartridges and delta 8 THC carts. Also known as weed pens, these devices are typically compatible with 510-threaded oil carts. To start, remove the rubber seal from the bottom of your oil cartridge and connect it to the battery. Make sure the device is charged and turned on, if it is a push-button vape pen. Also don’t press the button until you start inhaling or it might burn your lips.
Start with a small puff, and wait a few minutes to gauge the effects, especially if you are new to vaping THC oil. The effects might seem subtle at first, but can creep up on you.
If your device has multiple voltage settings, start at the lowest setting to avoid dry/burnt hits. (The ideal range for most oil carts is 3.3-3.8 volts.)
Many of the newer cartridges utilize ceramic-based coils that can handle more voltage without burning out. Some will require more voltage to achieve a satisfying puff.
Check the best 510 thread batteries to see other devices available for vaping cartridges.
Dabs and wax
The best way to vape wax is to use a vape pen specifically designed for dabs. There are cartridges that work with your standard vape pens, but most dab pens provide a bit more airflow and generally have atomizers with ceramic or quartz quicks that can handle the higher temperatures required for dabs. Unlike oil cartridges, you can press the button before inhaling to preheat your dabs.
Load a small amount of wax into the heating chamber. A dab tool is highly recommended.
Don’t overload the chamber or you will run the risk of clogging and/or leaking—it will not perform well and it will reduce the longevity of your coils.
Prime the coil by gently pulsing the fire button, which will slightly melt the wax.
Take a puff while holding the button, always start with small puffs.
You can pulse the button while inhaling to prevent it from getting too hot.
Wait a few minutes between puffs, never underestimate the strength of your dabs.
Weed
There are weed and dry herb attachments for regular push-button vape pens, but they are not very effective at vaporization. If you are looking to vape flower properly, you’ll need a dedicated portable weed vaporizer or a good dry herb vape pen designed for flower that isn’t going to combust your bud.
How to use a vape pen for CBD
CBD oil cartridges
Disclaimer: CBD oil cartridges are suitable for vaping. CBD oil tinctures are oil-based and are not suitable for inhalation.
Pre-filled CBD cartridges are a convenient way to vape full spectrum CBD oil and CBD distillate. Similar to weed oil cartridges, all you have to do is remove the rubber seal and screw the cartridge on to your device. If you have a disposable vape pen, just open it up and start puffing away.
Take a small puff, and wait a few minutes to gauge the effects.
If your device has multiple voltage settings, start at the lowest setting to avoid dry/burnt hits. (The ideal range for most oil carts is 3.3-3.8 volts.)
Many of the newer cartridges utilize ceramic coils can handle more voltage without burning out. They may require more voltage than older-style cartridges to achieve a satisfying puff.
CBD vape juice
CBD vape juice is very similar to nicotine e-liquid. That means you can use a standard e-liquid vape pen for CBD vape juice. You can fill up any empty oil tank with your own CBD vape juice, but for better flavor and vapor production, you’ll want a modern e-liquid vape pen that can handle most of the e-liquids on the market today.
The two main styles of e-liquid vape pens are going to be either mouth to lung (MTL) or direct lung (DL). MTL vape pens are similar to cartridges, in that they provide a tighter cigarette style draw and don’t require a lot of power to heat up. Direct lung vape pens provide a looser draw, more airflow, cloud production and require more power than MTL tanks because they have lower-resistance coils. Some devices are capable of both styles of vaping depending on which type of coil you are using with it.
Make sure you are vaping a CBD cartridge or CBD vape juice and not a CBD oil tincture.
Sub ohm devices are ideal for high-strength CBD, MTL devices are ideal for low-strength CBD.
Fill your cartridge or tank with CBD vape juice and attach it to your vape pen.
Wait at least 5-10 minutes to allow the coil to absorb the e-liquid.
Take a small puff and wait a few minutes to gauge the effects.
You don’t need to hold it in, you can casually inhale and exhale normally.